Magic Shield

MAGIC SHIELD
During years of experiments, we discovered that the strength, solidity and durability for our materials could not been efficiently improved by utilizing Australian black gravel with resin or vacuum ceramic powder with resin, a space technology transfer. As a result, to avoid corrosion successfully, we use white cement, which offers great solidity and durability, as aggregate and mix macromolecular chemical materials, which seal porosities successfully. On the other hand, besides exerting white cement to lower solar energy absorption, we adopt high-tech thermal insulation materials to achieve excellent heat insulation.

Five major advantages
1. Effectiveness for waterproof,thermal insulation and anti-corrosion
2. Offering a wide range of application due to availability for color mixing
3. Rapid construction and no second construction is required to complete the work
4. Eradicating mildew thoroughly : saving maintenance costs
5. Strong adhesion: reducing risks of abrasion and falling

Product Comparison

Item

Normal
Cement

Steel Plates

Magic Shield

Heat conductivity(W/m*k)

1.2

30

0.2641

Adhesive strength(kgf/cm2)

10

 

17.5


Operating Mode
Air spray coating
Airless spray coating
Brush coating
Roller coating
Trowel coating

Test Report
Magic shield products passed SGS inspections, and the test results are attached as below:

Test items

Test methods

Test Results

Durability (500hrs)

ASTM C154-06
ASTM D2616-96

Level: 3 out of 4.5

Heat conductivity (W/m*k)
(Average temperatures: 30±5  C)

ASTM C518-04 0.2641

0.2641
(normal cement plates: 1.2)

Adhesive strength (kgf/c)

Referring to CNS 10639 (1983)

17.5
(standard is 10)

Water absorption rate

 

Referring to CNS3763 (2009)

0.08
(Standard is 0.5)

Water penetration rate

0.09
(Standard is 0.5)

 

Product Introduction

 

Functions

Textures for
application

Areas for construction

UTC-101

Waterproof,
thermal insulation

concrete

Concrete roof and outer walls

 

UTC-202

 

Waterproof,
thermal
insulation,
anti-corrosion

 

other textures except
concrete

Roofs of sheet metal buildings, outer walls, ERP, wooden
buildings, outdoor switch cubicles, outer cases of
electronic control boxes, tile repair and maintenance

 

 

UTC-303

 

Waterproof,
anti-humidity

 

concrete

Diaphragm walls of high-rising buildings’ basements, outer
walls of basement using open cut method, outdoor walls,
bathrooms, kitchens, balconies, buildings without
basements, swimming pools, pools



Product Procedurces


Notice:
1.Setting time for coating is 2 hours.
2.Avoid premature water release: water in 2 hours or heavy rains in 4 hours after completing application can damage construction areas
3.Protection for operators’ eyes and nose is a must for coating operators
4.Each pack of Magic shield requires 500cc seaweed glue while in arid climates or high temperatures